{{g.title}}
{{g.lead}}
Jump to section
{{sec.h}}
Tip:
Short written guides for the things people make most. Each one matches what you’ll see in the studio.
{{g.lead}}
Tip:
Open the studio, add a few shapes, size them exactly and export a file for your slicer. No CAD experience needed.
Open the studio in your browser on a computer or a tablet. The iPad app (iPadOS 16.4 or later) is on the App Store, and the Android app (Android 10 or later) is in testing. Saving and exporting need a free account.
Start designing freeIn the bar along the bottom, choose your printer next to Printer. The mat changes to match its bed, so you can see at a glance whether your design fits.
Drag a Box, Cylinder, Sphere, Cone, Wedge or Torus from the left onto the mat, or tap it to drop one in.
Drag the shape to move it. Drag the white and amber handles to size it, the dark cone handle above it to raise it, and a colored ring to rotate it.
With a shape selected, type its width, depth and height in the panel on the right. Switch between millimeters and inches with Units in the bottom bar, and use Snap to set how far shapes jump when you drag them.
With a mouse: right-drag to look around, scroll to zoom, and middle-drag (or Shift and right-drag) to pan.
On a tablet: drag empty space to look around, and use two fingers to pan and zoom. The Home, Top, Front and Side buttons along the top snap back to a straight-on view.
Click or tap Export at the top right. Choose STL for one solid piece, free and unlimited, or 3MF to keep each part’s color with ShapeNook Plus. Pick your slicer, export, then open the file in your slicer to print.
Tip: To keep a shape’s proportions while you size it, turn on Keep proportions in its panel. With a mouse, you can also hold Shift as you drag a handle.