Skip to content
Features

A full workbench, with nothing in your way.

Every screen below is the real ShapeNook studio. Shapes and parts on the left, views along the top, and the mat in the middle, where you build.

The ShapeNook studio: the shape buttons on the left, view buttons along the top, and a red storage bin, a white cylinder with NOOK wrapped around it, a bolt and a knob on the print mat
Shapes and text

Build with blocks you already understand.

Box, cylinder, sphere, cone, wedge, torus and text. Click one or drag it onto the mat, then make any shape a hole to cut it out of another.

  • Text in three fonts (sans, rounded and serif), set flat, bent on an arc, or wrapped onto a cylinder, cone or sphere
  • Rounded edges with a single slider
  • Group, mirror, copy and stack: drop one shape on another and it sits on top
  • Press and hold (or right-click) any shape for its menu
Text NOOK wrapped onto a cylinder, with the text settings panel showing Flat, Arc and Wrap, Raised or Cut in
Precision

Type the size. Get the size.

Every shape has exact width, depth and height boxes, and a position measured from the front-left corner of your printer's bed.

Millimeters, centimeters or inches

Pick the units you think in, and set how far each nudge or drag moves, or turn snapping off.

Snap guides and lining up

Drag near an edge or center and it clicks into line. Pick a few shapes to align or space them evenly.

Build on any face PLUS

Tap a face, even a slanted one, and new shapes sit flat on it.

Repeat in a circle PLUS

Make copies around a point or another shape, all the way around or part way, with a live preview.

Your printer’s real bed

Choose your printer and the mat matches its size, so nothing ends up too big.

Holes that fit

Make it a hole for… sizes holes for screws, heat-set inserts, nuts, bearings and magnets. Print the fit test from Tools once and every fitted hole matches your printer. With Plus, fitted holes resize themselves when you change your allowance.

Try it here

Fits the first time. Drag to see why.

Every printer squeezes holes a little smaller than drawn. ShapeNook adds back what yours takes away, measured once with the fit test in Tools. Slide the allowance and watch a 6 mm magnet go into its pocket.

Too tight: it won’t go in.
6 × 4 mm MAGNET pocket as printed: 5.82 mm · gaps drawn 40× wider
The Parts panel showing the Mechanical category of the parts library
Parts library

3,945 parts, sized to print well.

Search “M3”, “nut trap” or “1/4-20” and drop the part in. Every part has real-world sizes and keeps its real name.

  • Fasteners and holes, joints, and pockets and stand-ins for everyday objects, 1,443 parts FREE
  • Enclosures, mounts and clamps, organizers and storage, labels, mechanical, screw-top jars, the flush screw cap and holders for everyday objects PLUS
  • Adjustable hinge and snap clip with sliders FREE
  • Real objects: pockets and see-through stand-ins for tea lights, batteries, tracker tags and more. Overlaps show in red FREE
  • Dovetails, puzzle joints and pins FREE
  • Anyone can browse and preview every part
Ready to print

Catch problems before the printer does.

  • Overhang check: anything that would print in midair turns red, and its shadow shows on the mat so you can see where support would go PLUS
  • Cut shapes apart: a straight cut, Split to fit when it’s too big for your bed (with pins that join the pieces back together), or cut by painting a part PLUS
  • Colors and finishes show as they’ll print: matte, silk, metallic, translucent and clear
  • Tell it how many colors your printer holds, and it warns you when a design uses more
  • Print tests in Tools: fit, threads, moving parts, press-fit, overhangs and bridging. Print one, tap the number that came out best, and holes, nuts, hinges, magnet pockets and the overhang check match your printer FREE
The Overhang check on a blue box with a ledge sticking out: the underside of the ledge and its shadow on the mat show in red

Past 45° from upright it turns red, the same check that runs in the studio.

The Export for your slicer window: 3MF with parts and colors, Bambu Studio as the slicer, and the filaments Signal Red, Bone White and Charcoal
Export

A clean file, made for your slicer.

Export, then open the file in your slicer. Pick which slicer you use and the file is set up for it.

  • STL: one solid, unlimited FREE
  • 3MF that keeps every part’s name and color, set up for Bambu Studio, OrcaSlicer or PrusaSlicer. Cura and other slicers open the parts, and you set the colors there PLUS
  • Every Bambu Lab and Prusament filament color, plus your own spools PLUS (Free has 7 basic colors)
  • Import STL, OBJ and 3MF at full detail, and SVG drawings as one piece. Split imported drawings into parts by color PLUS
  • Paint any model in colors: smart fill follows its grooves, a brush that snaps to edges, height bands, or describe the colors and have it painted for you (30 credits). Each color becomes its own part PLUS
Maker’s mark

Sign your work.

Put your signature on what you make, the way woodworkers and potters do. It goes on in one step and prints clean.

  • Type your name in one of six signature styles, sign on screen with a finger or pen, or bring in a signature drawing (SVG)
  • Add a small line under it, like your shop’s name, and the year
  • Cut into the bottom of a print, mirrored so it reads right when you turn it over, or raised on top
  • Thin lines are thickened just enough for your nozzle, so the signature prints instead of blurring
  • Save it as My mark, ready for your next design
  • Export designs that carry your mark PLUS

Anyone can make a mark and see it on their design. Exporting a design with a mark comes with Plus. How to sign your work

A red coaster in the studio with a raised white signature on top reading Jamie Rivera, with Rivera Workshop and 2026 in small capitals underneath
Anywhere

Desk, couch or classroom.

  • The latest Chrome, Safari, Edge or Firefox. On a computer, add it from the browser to work offline
  • An iPad app for finger and pen, free on the App Store (iPadOS 16.4 or later); the Android app is in testing
  • Light, dark, or follow your device
  • Your designs save as you go, with thumbnails, and share links anyone can open
  • Keyboard shortcuts for every tool, with screen reader support in progress
Get the iPad app
The ShapeNook studio in dark mode

Start free. Add Plus when you need it.

Plus adds 3MF with colors, every filament color, all 3,945 parts, maker’s marks, painting models in colors, 3D figures and flat art from a picture, the overhang check, building on any face, repeating in a circle, cutting shapes apart, unlimited designs and more AI credits. See pricing

Start designing free
Ask Nook