Skip to content
TextBeginner4 min

Sign your work with a maker’s mark

Put your signature on what you make: type it in a signature style, sign it on screen or bring it in from a file, then cut it into the bottom of a print or raise it on top.

Guide 4 of 16See all guides
Jump to section
  1. 1Open Maker’s mark
  2. 2Make your mark
  3. 3Add a small line and the year
  4. 4Pick a width
  5. 5Put it on your design
  6. 6Save it as My mark
  7. 7What’s free
A red coaster with a raised white signature on top reading Jamie Rivera, with Rivera Workshop and 2026 in small capitals underneath

Open Maker’s mark

Select the shape you want to sign. Then choose Tools on the left and pick Maker’s mark.

Make your mark

There are three ways. Type it: type your name and pick one of six signature styles, each shown in your own name. Sign it: sign in the box with a finger, a pen or the mouse; Undo stroke takes back the last line. From a file: bring in your signature as an SVG drawing, like one a designer made for you. Its filled shapes become the mark.

Add a small line and the year

Type a short line to go under the signature, like your shop’s name or a motto. It’s set in small spaced capitals. Turn on Add the year to add this year to that line.

Pick a width

Choose 25, 40, 60 or 80 mm. ShapeNook thickens thin lines just enough for the nozzle set in the bottom bar and tells you by how much. If it says some lines are still too fine, make the mark wider or pick a bolder style. On a shape, a mark that’s too wide is made smaller to fit.

Put it on your design

Bottom cuts the mark 0.6 mm into the underside, mirrored so it reads the right way when you turn the print over, and the bottom stays flat on the bed. Top puts it on top, cut in or raised. On the mat puts it on its own so you can move it anywhere. Choose Put it on the design.

Save it as My mark

Choose Save as My mark. Next time you open Maker’s mark, your mark is ready to put on any design.

What’s free

Anyone can make a mark and see it on their design. Exporting a design that has a mark on it comes with ShapeNook Plus.

Tip: Small lettering on the bottom can blur if the first layer is squashed. If it does, make the mark wider or try a bolder style like Bold script.

Was this guide helpful?
Ask Nook