Skip to content
TextBeginner6 min

Raised and cut-in text

Put a name on it. Raise letters off a surface, cut them in, bend them into an arc or wrap them around something round.

Guide 3 of 16See all guides
Jump to section
  1. 1Add text
  2. 2Raised or cut in
  3. 3Bend it into an arc
  4. 4Wrap it around a round shape
  5. 5Give it its own color
NOOK wrapped around a cylinder on the mat, with the text settings set to Wrap

Add text

Drag Text onto the mat and type your words in the panel. Pick Sans, Rounded or Serif. For small text, bold, simple letters print most cleanly.

Raised or cut in

Leave the text Solid to raise the letters, or choose Hole to cut them into whatever they overlap. Size it like any shape, and drag the cone handle to rest the letters on the surface.

Bend it into an arc

Choose Arc and drag the Bend slider. The words arch over the top like a badge, or curve along the bottom.

Wrap it around a round shape

Choose Wrap and pick a cylinder, cone or sphere. The letters bend to its surface, raised or cut in, so a name can go around a cup or a planter.

Give it its own color

Pick a different color for the text so it stands out. Export a 3MF with ShapeNook Plus and each color arrives in your slicer ready for a multi-color print.

Tip: Printing in one color? In your slicer, add a filament change at the first layer of the letters, then swap filament when the printer pauses.

Was this guide helpful?
Ask Nook