Skip to content
Multicolor prints

Turn a drawing into a multicolor print.

Keychains, signs, ornaments and magnets from a logo, a sketch or a child’s drawing. The trick is splitting the picture into one solid piece per color, at sizes a 0.4 mm nozzle can actually print.

A Santa on a toilet painted red, white, skin tone and black, next to the ShapeNook Paint panel with its tool icons, colors and filament change estimate
How it works

A multicolor print is one piece per color

Your slicer doesn’t read colors from a picture. It reads parts. A two-color keychain is really two shapes sitting together: the base in one color and the raised artwork in another. Get the picture into separate pieces, one for each color, and the rest is easy.

There are three ways to get there in ShapeNook, from a picture, from a drawing file or by painting a model.

Three ways in

Pick the way that matches what you have

A PHOTO OR SCAN · PLUS · 60 CREDITS

Flat art from a picture

Open AI, choose From a picture, then Flat artwork. The picture is redrawn in clean, flat colors with bold outlines, so details like leaves and lettering stay sharp, then built as raised pieces, one per color. Pick 2 to 16 colors. Any lettering is read first so you can check the spelling.

AN SVG FILE · FREE TO IMPORT

Import a drawing

Import an SVG from a drawing app and it comes in as one solid piece on any plan. With Plus, split it into parts by color, so each color of the drawing becomes its own piece.

A 3D MODEL · PLUS

Paint it

Paint any model in colors: smart fill follows its grooves, a brush snaps to edges, or describe the colors and have it painted for you (30 credits). Each color becomes its own part.

Sharp details

Make small details survive a 0.4 mm nozzle

Most blurry multicolor prints aren’t a printer problem. The nozzle lays down lines about 0.4 to 0.45 mm wide, so anything thinner than that can’t be drawn at all, and anything thinner than two lines breaks up. Design for that and the print comes out crisp.

  • Make outlines and thin strokes at least 0.8 mm wide, two nozzle widths. Bold outlines are why flat art redraws pictures the way it does.
  • Size the whole piece up before you thin anything down. A 40 mm keychain hides detail that a 70 mm one shows.
  • Keep raised letters at least about 6 mm tall and choose the rounded or sans font over the serif for small text.
  • Leave gaps between colors at least 0.8 mm wide too, or neighboring pieces merge into one blob.
  • Print the color layers thinner. In your slicer, a layer height of about 0.08 to 0.12 mm for the top colors gives cleaner edges.
  • Turn on ironing for the top surface in your slicer for a flatter, shinier face, and raise the flushing volume a little if colors bleed.
Coming next: a thin-line check in the studio that marks any line or gap too narrow for your nozzle before you export. It’s on the Roadmap.
Printing it

Get the colors to your printer

With a color system (an AMS, a CFS or a tool changer): with ShapeNook Plus, export a 3MF. It keeps every part’s name and color and opens ready in Bambu Studio, OrcaSlicer or PrusaSlicer. Match each color to a filament slot, slice and print.

With one nozzle and no color system: give each color its own height, like a base 3 mm tall with the artwork raised 1 mm on top, then add a color change in your slicer at the first layer of each new height. The printer pauses and you swap the filament. STL export is free for this.

The Export for your slicer window: 3MF with parts and colors, Bambu Studio as the slicer, and the filaments Signal Red, Bone White and Charcoal

Questions about multicolor prints

Do I need an AMS to print in more than one color?

No. If each color sits at its own height, any printer can do it by pausing to swap filament. A color system lets colors share the same layer, which flat designs with side-by-side colors need.

Why are my small details blurry?

Usually the lines are thinner than the nozzle can draw. Make strokes and gaps at least 0.8 mm wide, size the piece up, and print the color layers thinner.

How do I make my own file with three colors?

Get the design into three separate pieces, one per color: flat art from a picture, an SVG split by color, or a painted model. Export a 3MF with Plus and match each color to a filament slot in your slicer.

Can I use someone else’s logo or character?

Only if you have permission. Your own drawings, your child’s artwork and designs you’ve licensed are fine.

From a drawing on the fridge to a print on the keyring.

Start designing free
Ask Nook