{{g.title}}
{{g.lead}}
Jump to section
{{sec.h}}
Tip:
Short written guides for the things people make most. Each one matches what you’ll see in the studio.
{{g.lead}}
Tip:
Color any model on the mat, from a 3D figure to an STL you imported: fill a part in one tap, brush, lasso or stamp, then export a 3MF your slicer prints in every color.
Select the model and choose Paint on the left. Paint comes with ShapeNook Plus. Everything else on the mat fades back so you can see what you’re painting, and the hover label beside the pointer names the color under it.
The tools sit in one row at the top, each with a key: Smart fill (F) fills a part up to the grooves around it in one tap, Brush (B) paints where you drag, Whole piece (W) fills a connected piece, Height band (H) paints everything between two heights, Lasso (L) paints inside a loop you draw (hold Shift for a box), Outline (O) adds a band along a color’s edge, Stamp (T) paints text or a picture onto the surface, and Eraser (E) takes paint off. The eyedropper (I) picks up a color from the model.
The settings for the tool you picked show right under the row: the brush size, Snap edges to grooves, the band’s heights, the stamp’s text and width.
The first chip is the model’s own color, and every chip after it is a color you paint with. Tap a swatch to add a color, or the add-filament button to pick a real filament from My filaments or the catalog, so the screen shows what will print.
Under the picked color: show where it is, hide it, shrink or grow its edges, change its filament, and see about how many grams it uses. Drag one chip onto another to merge two colors, and × removes a color with its paint.
With a mouse, click or drag on the model and drag empty space to turn the view. On a tablet, paint with a finger or a pen; once you use a pen, a resting palm or finger only turns the view, and pressing harder makes the brush bigger. A small toolbar at the bottom keeps the tool, the color, the size and Undo close to your hand.
In a hurry? Paint it for me colors the model from a sentence like “a red barn with a white roof” for 30 credits, using your filaments where it can.
Open Symmetry to mirror every stroke left and right, front and back, or top and bottom, or to repeat it 2 to 12 times around the middle, which suits wheels, flowers and ornaments.
True color shows the colors in flat, even light. X-ray (X) makes the model see-through, so you can find paint on the far side and paint through to it. Smooth edges straightens jagged color edges, and Find specks finds tiny patches that would each cost a filament change, then cleans them up in one step.
The line above Undo estimates the filament changes and the purge your print will need. Tap it to see which color causes the most and how to cut them, by merging it or moving it to its own height.
Choose Done. The model stays one piece with its paint on it, so even a very detailed figure is ready in a moment. Export a 3MF, and Bambu Studio, OrcaSlicer and PrusaSlicer open it painted, with each color on its own filament slot.
Using Cura, or want each color as its own file or part? Turn on Cut each color into its own part under Export options before you choose Done. More on exporting is in Export it for your slicer.
Tip: Fewer colors on the same layers means fewer filament changes. Keep small accents like eyes or buttons in one color, and watch the estimate as you paint.