Skip to content
PartsBeginner5 min

Design around real objects

Make holders, trays and hiding spots for things you already own, like an LED tea light, AA batteries or a tracker tag, with exact pockets and see-through stand-ins that show the fit.

Guide 7 of 16See all guides
Jump to section
  1. 1Find the object
  2. 2Cut a pocket
  3. 3Add the stand-in
  4. 4Watch for red
  5. 5Or use a ready-made holder (Plus)
A red box with a striped battery pocket and a see-through AA battery stand-in; where the stand-in pushes into the box, the overlap shows in red

Find the object

Choose Parts, then Everyday objects. You’ll find LED tea lights, batteries (AA, AAA, C, D and 9 V), coin cells like the CR2032, US coins, tracker tags (AirTag size), pens and markers, cards, LED light strips and zip ties, all at their published sizes. Search works too: try “AA” or “CR2032”. Marbles, dice, miniature bases and brick-compatible studs are under Toys and games.

Cut a pocket

Pick the object and choose Pocket. It’s a hole the size of the object plus your printer’s fit allowance, so the real thing drops in. Place it, move it into your design and group them to cut it.

Add the stand-in

Leave Add the stand-in too on and a see-through copy of the object sits in the pocket, so you can see how the real thing fits. A stand-in never exports and doesn’t count toward the filament estimate. Any shape can be a stand-in too: select it and choose Stand-in.

Watch for red

Where a stand-in pushes into a solid part, the overlap turns red. Move the pocket or the stand-in until the red is gone and the object has room.

Or use a ready-made holder (Plus)

Choose Holder for a finished piece: a cup for a tea light, a battery organizer with 4, 8 or 12 slots, a coin tube, a tracker tag keychain, a pen block or a card stand. Holders come with ShapeNook Plus. Pockets and stand-ins are free for everyone.

Tip: Tea light parts are for LED tea lights only, never a real flame.

Was this guide helpful?
Ask Nook