Design Your Own 3D Printed Christmas Ornaments (Names Too)

Every December, the same box comes out of the attic. Some ornaments are chipped. Some have lost their hooks. None of them have your family's names on them.
You can fix that with a 3D printer. A flat ornament is one of the easiest things to design and print, and it makes a good first project for a new maker. In this guide, you will design a simple layered ornament, add a name, and set up a hanging loop that holds.
Why flat ornaments work well
A flat ornament is a shape with a little thickness. It sits flat on the build plate, so it needs almost no support. That means it prints fast, and the surface looks clean.
The design is also forgiving. You can change the shape, the size and the words, and the result still looks good.
Start with a simple shape
Open ShapeNook in the studio and start with a flat disc or a star. Set the outer size with exact numbers. A disc about 60 mm across is a good size for a tree.
Then add the details:
- A name, cut through the front of the disc
- A small date or year on the back
- A border or a snowflake pattern cut into the edge
If your ornament has letters, make the strokes at least 1.2 mm wide with a 0.4 mm nozzle. Thin letters can break off or fill in during printing.
Add a hanging loop that holds
The hanging loop is the part that fails most often. A thin loop can snap when someone lifts the ornament off a branch.
Make the loop at least 3 mm thick. Give it a round hole large enough for ribbon or a small hook, and place it near the top edge, not at the very corner. Check the loop in the studio before you print.
Use color for a layered look
A layered ornament has two or more colors stacked on top of each other. You can print it in one go with a multi-color setup, or you can print one layer, pause, and swap the filament for the next layer.
A good pattern is 2 to 4 colors:
- A base layer in one color for the shape
- A middle layer in a second color for the border
- A top layer with the name in a third color
Keep the number of colors low for your first ornament. Each swap adds time and one more step where something can go wrong.
Design the name
To add a name, type it in the text tool and set the font size. Keep the name short. Long names need a bigger ornament or a smaller font.
Check the letter spacing. Letters that are too close together can merge. Print a small test ornament first if the name is important, such as a gift for a grandparent.
Export the file and print it
When the design is ready, export the file and print it. Slice it in your usual slicing tool and check the preview before you start. Look for:
- Letters that show all their strokes
- Layer lines that line up with your color changes
Exporting a 3MF file with every part's color is a Plus feature.
Make it a family project
Name ornaments are a good way to get everyone involved. Each person can choose a shape, a color and the name they want on the tree. Keep a few blank ornaments on hand for last-minute gifts.
For more on how to plan a design that prints well, read the ornament guide. If you want a head start, the Christmas ornament collection has starting designs you can change.
Leave time before the holidays
Print time adds up quickly when you make several ornaments. Start a few weeks before you need them, and leave room for a test print. A single failed loop can cost you an evening.
Start your first ornament
You do not need experience to make a good ornament. Pick a shape, add a name, and set the loop. Then print one and check it on the branch.
Start in the studio and design your first ornament.
What will you make first?


